English 繁中 简中

CLN-06-CHS Full Automatic Terminal Crimping Soldering Machine (Single Heade)

  • Product Feature
    • Variable stripping lengths: Touch screen operations display. The wire strip length can be adjusted on the main control panel.
    • Servo motor control system to complete fixed-inch, wire cutting, stripping, crimping terminals, semi-stripping soldering and other actions, the action will automatically match the relevant time adjustment.
    • Operating method: Manual, single cycle and Auto (Continuous).
    • Design detection device, an exception can be automatically shut down, and the detected position of the display on the control panel, convenient and fast rule out conditions to minimize downtime.
    • Crimping adjust the position using the touch panel crimping position.
    • Fast manual tension adjustment with micro knob (in cells of 0.02mm) without any tool.
    • twisted way using the twist type, the use of semi-stripping PVC, twist and twist to adjust the position and speed to change the twist of the tightness, and not destroy the core surface, so twisted lines to achieve straight and beautiful.
    • The quasi-90° tin dipping angle of the machine provides even tin dipping to the wire (in precise dipping depths).
    • With the wire holding position and the tin-dipping tip adjustable to 10 mm, this machine keeps the tin dipping end of the wire from curving, assuring precise dipping positions.
    • An automatic wiper is provided to remove tin chips from tin bath.
    • Design with automatic fill function, the position of the wire-stick tin is more accurate.
    • The 100 sets of memory files can be saved or retrieved for required actions.
  • Product Specifications
    Power supply AC 220 / 380V　50 / 60 HZ 3 Phase
    Wire size AWG# 14～22, 0.3～3mm2 (PVC maximum OD4mm)
    Air pressure 0.5～0.6 Mpa
    Crimping force 2.5 Ton (Servo motor Terminal crimping machine)
    Speed 2700 pcs-hr (300 mm)
    Cut length of wire Cable length 50mm～5,000mm (Standard)
    Stripping length Front end 0～7 mm， rear end 0～15 mm
    Capacity Cutting wire, stripping on one end, stripping both ends, half-stripping on one end, half-stripping both ends, crimping on one end, crimping both ends
    Detectors equipped Without wires,wire joint, terminal overload, terminal load, air presser low
    Dimensions 1,100 L×1,100 W×1,900 H mm
    Weight Approx.550 kgs
Inquire Next
Back to list