English 繁中 简中

CLN-05-CH Full Automatic Terminal Crimping Soldering Machine(Twin Heade)

  • Product Feature
    • Variable stripping lengths: Touch screen operations display. The wire strip length can be adjusted on the main control panel.
    • Servo motor control system to complete fixed-inch, wire cutting, stripping, crimping terminals, semi-stripping soldering and other actions, the action will automatically match the relevant time adjustment. 
    • Operating method: Manual, single cycle and Auto (Continuous).
    • Design detection device, an exception can be automatically shut down, and the detected position of the display on the control panel, convenient and fast rule out conditions to minimize downtime.
    • Crimping adjust the position using the touch panel crimping position.
    • Fast manual tension adjustment with micro knob (in cells of 0.02mm) without any tool.
    • Wire twist is made possible by 3 rotary claws driven by motors. Adjustable rotation speeds help change tension of the twisted wires and keep them straight and neat.
    • The quasi-90° tin dipping angle of the machine provides even tin dipping to the wire (in precise dipping depths).
    • With the wire holding position and the tin-dipping tip adjustable to 10 mm, this machine keeps the tin dipping end of the wire from curving, assuring precise dipping positions.
    • An automatic wiper is provided to remove tin chips from tin bath.
    • Design with automatic fill function, the position of the wire-stick tin is more accurate.
    • The 100 sets of memory files can be saved or retrieved for required actions.
  • Product Specifications
    Power supply AC 220 ∕ 380V　50 ∕ 60 HZ　3 phases
    Wire size AWG# 22～32  (Wire OD 2.5 ~ 0.5mm)
    Air pressure 0.5～0.6 Mpa
    Crimping force 2.5 Ton (Servo Motor Semi-Automatic Terminal Crimping Machine)
    Speed 3300 pcs-hr (300 mm)
    Cut length of wire Cable length 38～5,000 mm (PVC length shortest 23mm) 
     
    Stripping length Front end side 0~5mm; Rear end side 0~10mm
    Capacity Cutting wire, stripping on one end, stripping both ends, half-stripping on one end, half-stripping both ends, crimping on one end, crimping both ends, twister on one end (optional equipments twister)
    Detectors equipped Wire overload, wire joint, wire load, terminal overload, terminal load, before skinning detection , after stripping detection , crimp detection,air presser low.
    Dimensions 1,640 L×1,400 W×1,900 H mm
    Weight Approx. 630 Kgs
Inquire Next
Back to list